How Long Does Bathtub Resurfacing Process Last?
You would love to give your bathroom a fresh, new look. However, your budget is tight. You cannot afford to have your bathtub removed and replaced. You might be thinking about resurfacing your tub instead. However, you have concerns about it. You might be wondering how long bathtub refinishing will last?
Briefly put, the answer will depend on which process is used and how well you take care of your bathtub. In this article, we will be discussing two popular bathtub resurfacing methods and give you a good idea of how long they last. We will conclude with tips on how to keep the surface of your bathtub in great condition.
Resurfacing a bathtub involves a prime layer being sprayed on the tub and then painting over the primer. The quality of this finish will depend on the painter’s skill. This is why we do not recommend that you do this yourself unless you are experienced with airbrushing.
The process of resurfacing is slightly less expensive since it involves less work. Paint is applied in layers in order to completely cover the base. It is a good technique to use and, when performed properly, should last for five years or longer.
The downside is if your tub has flaws on its surface, those might show through. This surface needs to be treated gently since it can have a tendency to chip.
The tub reglazing method is more expensive, but the results can last from 10 up to 25 years. This process involves the gloss being removed from the bathtub and then several layers of enamel being applied. The advantage is the coating is more resistant to chipping.
The downside to this method is that the coating will wear away eventually.
How to Extend the Useful Lifespan of your Resurfaced Bathtub
Ask your contractor when you can begin using the bathtub again. You will need to wait for 24 hours at least before you get the surface wet under normal circumstances.
It is also a good idea to ask your contractor which products should be used with your resurfaced bathtub. However, in general, the following bathtub refinishing tips will apply:
- Never use harsh acids, bleach, or abrasive cleaners
- Stick to only using gentle liquid cleaners
- Use a cloth or soft sponge to wipe down the area
- To prevent stains, wipe the tub down right after the water has drained
- Rinse well after you finish cleaning
- Do not use suction cups or other items that are similar on the new surface
- Never allow a cleaner to sit on the surface of the tub for an extended amount of time
If you follow the above tips, your bathtub will stay in great condition for many years.
How Can I Tell When It Is Time For The Coating To Be Reapplied?
If you take good care of the surface, you will not need to worry about recoating your tub for ten to twenty-five years. Below are signs that indicate your tub needs to be resurfaced again:
Wear begins to show around the tub’s drain area. When there is wear that is a sign of the seal being breached. After water gets in between the tub and seal, it will cause the coating to fail. Due to this issue, it is important to be careful when replacing the drain as well as other fixtures.
The ledge on the tub is the next place that is likely to show wear. We recommend that you store your toiletries inside of a caddy instead of putting them on the ledge. Residue from shampoo as well as other chemicals may drip on the surface which can cause it to start to degrade if you don’t.
How quickly your bathtub drains can affect its longevity as well. The coating can degrade if water stands for too long.
If you need a professional refinisher in Phoenix Arizona to reglaze your bathroom fixtures, please contact our recommended sponsor: Bathtub Refinishing Pros in Phoenix AZ
Phoenix Bathtub Refinishing Pros
1637 W Knudsen Dr Ste 100
Phoenix, AZ 85027